Description
The Show Tech Laguna Clipper is designed to be both ergonomic and versatile, with a powerful two-speed motor and a compact profile. Use the standard speed setting of 5500 rpm for detail work and smaller clipping tasks. Turn up the speed to 7000 rpm to cut through thicker coats or larger areas.
Stylish and budget-friendly, the Laguna clipper works with a wide range of Laguna clipper blades. These sharp, high-quality clipper blades allow groomers to quickly and easily clip all coat types needing from 0.2 mm(#30) to 12 mm(#3F).
Each Laguna clipper blade features a stainless steel lower blade and titanium-coated ceramic upper blade. This coating reduces friction and heat, allowing longer sessions and a sharper edge that lasts.
The Laguna is smaller, finer and lighter than most other clippers on the market. The streamlined design makes it very comfortable to use, fitting perfectly into any hand. Soft-touch non-slip sides make this clipper easy to grasp, improving maneuverability and versatility, so that groomers can effortlessly clip smaller and finer areas with a perfect finish.
The lithium-ion battery guarantees up to 4 hours of cordless clipping and a long service life. If the battery begins to run low during a long session, simply plug the included universal USB cable into the clipper to charge it while you continue to work.
- Professional-level, compact clipper with 2 speed settings of 5500 and 7000 rpm
- May be used with or without a cord
- Stainless steel lower blade
- Ultra-fine ceramic upper blade with revolutionary titanium coating for long-lasting sharpness
-
Includes
- Show Tech Laguna 4-in-1 Fine Clipper Blade (cutting lengths: from 0.3 to 2 mm)
- 2 plastic snap-on combs in 2 lengths (3/6 mm and 9/12 mm)
- May be used for detailed work, shorter clippings and smaller body areas as well as larger areas
- Adapted clipper blades allow more thorough clipping at different lengths
- Suitable for all coat types
- Ideal for dogs, cats, rabbits and other small pets
- Lithium-ion battery
Clipper Specs
- Average max running time ranges from 3(at 5500 rpm) to 4 hours(at 7000 rpm)
- Charging is done via the supplied USB cable
- Full Charging time is 180 minutes
- Length USB cable is 128.5cm or 4.2ft
- Voltage is 5V - 1A
- Quiet with an operating noise level of 62 dB
- Lightweight at 194g or 6.8oz
- Width of clipper blade (cutting edge) is 4.5cm or 1.8"
- Total clipper length is 18cm or 7"
- Circumference: 11.5 cm or 4.5"
* All measured data are approximate.
Additional Information
Instructions
Compatible with Show Tech Laguna clipper blades. The clipper blades cannot be sharpened and must be purchased separately when they need to be replaced.
How to Attach the Clipper Blade
Before attaching the clipper blade, adjust the cutting length button (b) to its upper position (with 1.0 mm visible). Then place the clipper blade on the device by first aligning it and then pushing it down until it locks into place.
How to Remove the Clipper Blade
Remove the clipper blade by pressing on the top of the clipper blade with the thumb of your dominant hand. Catch the clipper blade with your other hand to prevent it from falling and getting damaged.
The longer the coat, the more factors will determine your end result. When using the longer clipper blades, it is necessary to brush the coat and, in case of hair tangles, also to detangle it.
To obtain the best results and to work the fastest, we recommend that you always wash, dry and brush the coat thoroughly beforehand.
